Sc10 Outdoor Astroturf setup

[Deano]

I'm new to SC trucks and I had my first race meet last week.

I was quite pleased for a first outing, but also realised that the body roll on my SC10 was really slowing me down in the corners.

My Sc10 is a rtr brushless but I've replaced the motor combo with an ezrun 8.5t setup and I'm using Proline Trencher tyres, though I do also have a set of wheels with Kourse Kings on that I haven't tried yet. I was running Gold front springs and green rears with the std kit 30wt shock oil all round. I've also fitted RPM arms.

Anyway, before my next race I've changed the front springs to reds and the rears to blues and put 40wt oil in all round with no.3 pistons all round too.

I've just been for a blast down the street outside and the cornering is much better (and faster) but I still have more body roll than I would like.
Ride height wise it is pretty low at the rear with 5mm of preload spacers each side. It's higher in the front even with no preload spacers.

Research tells me that no one seems to be running sway bars, so what can I do to get rid of some more roll and get it cornering even better ?