|
#1
|
|||
|
|||
![]()
For the few that run Losi Mini Ts (and in particular Scotty). I am have problems centering my steering after left and right turns; Its not the servo (savox 257mg with "tightened" XTM rage servo saver) as, at the end of the servo saver arm (ballstud), it always returns to the same point; I put it down to slop in the front end components - It's mounted on my Exotec buggy - Heres what I've got:
Standard Losi 3.85mm Ballstuds (Brass colour) 3Racing Ball cups Losi TI Turnbuckles K-Factory Hubs,Hub Carriers,Arms and Centre Arm mount GPM Steering arms I notice movement of the Ball Cups on the Ballstuds - What Ball / Ballcup do you use? Could this be the main problem? The joints between Arm&Centre bracket, Arm & Hubcarrier and Hub Carrier&Hub seem tight enough (little movement) - but still there is quite a bit of wobble/slop at the wheels. Is this normal at this scale? Help please - it's really bugging me now ![]() |
Thread Tools | |
Display Modes | |
|
|