|
#1
|
||||
|
||||
![]()
Hi Guys,
The X11 went great on Sunday, giving me my best ever qualifying result at a National and I think my best ever finish. I ran a fairly standard X10 set-up on it which was: Front: Springs: 5.5t Pistons: Hard + Valve Oil: 35 Associated Toe: Parrallel Camber: 1 Degrees Castor: 1 washer behind wishbone Ground clearance: 16mm Anti Roll Bar: None Front upright to upper wishbone - NO spacer 1 way diff Rear: Springs: 5.5t/Gold Pistons: Soft Oil weights: 50wt Associated In-board toe-in per side: 3 Degrees Out-board toe-in per side: 0 Degrees Anti-squat: 1 1/2 Degrees Camber per side: 1 Degrees Ground clearance: 22mm Anti-roll bar: None Rear lower upright: Upper Hole Damper pickup point: Middle Tyres: WORN Schumacher Yellow Mini Spikes Motor - Novak 5.5 Sintered Cells - EP 4200's Novak GTB Front brake balance - N/A - 1 way diff Pinion - 16 Spur - 72 That is the same sort of set-up that I have been running on the X10 recently APART from the rear anti-squat. I think that is what made the rear of the car better over the bumps. There are a few front end changes from a std sort of set-up, but these are due to the front 1 way diff. The car generated so much grip that I never felt the need to run new tyres all day, and infact ran one set that were well worn in the first round all day. The car was just so 'chuckable' at the corners with them on. I'm well impressed, and am looking forward to playing with the set-up further. G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
Thread Tools | |
Display Modes | |
|
|