TLR 22 Build and Set-ups

[PaulUpton]

Setup from mid south regional yesterday indoors on carpet/slippy floor, qualified 4th but had nightmare finals, was the highest placed losi 22

Front Suspension
Toe: 0'
Ride Height: wishbones slightly above level
Camber: 2'
Castor: 10'
Kick Angle: 20'
Oil: 32.5w
Piston: 6 hole 1.3mm tapered
Spring: Green
Spindle Type: Kit
Shock Limiters: 2mm
Shock Location: 2-middle
Bump Steer: 0mm
Camber Link: 1 - 1mm washers on tower, 0mm washers on hub

Rear Suspension
Chassis Configuration: Mid
Toe: 4'
Anti Squat: 1'
Roll Center: HRC
Ride Height: Driveshafts Level
Camber: 3'
Wheel Base: Long
Oil: 32.5w
Piston: 6 hole 1.3mm tapered
Spring: Orange
Shock Limiters: 0mm
Camber Link: 1-B (2mm under hub and tower ball joints)
Shock Locations: 2-inside

62g under 96mm lipo (which is about the same as a pack of saddles) so effectivley no extra weight.

Front tyres: yellow staggers
Rear Tyres: yellow mini pins (medium insert)

Speed passion LPF
Ocra 6.5t motor
Savox slim servo