Kyosho Vega set-up

[InsideLineModels]

For anyone interested here is my starting setup for the Stotfold national assuming its going to be dry (stotfold is a high grip bumpy astro track with various jumps). If it rains i'll be removing the weight from under the speedo, going short wheelbase and changing to Schumacher green mini spikes as a starting point.

Front
45wt Oil (Losi)
Piston 3a
green spring #75
Outside hole on wishbone
Middle on Tower
Wide Track
Inner link position - middle with 2 washers
Outer link - long
Pivot block spacers - None
Kick up - 25 degree


Rear
25wt oil (Losi)
Piston 3a
Cobalt Spring
New Inside hole on wishbone (drilled one hole in from original postion)
3rd hole out on tower
Wheelbase - long on hub, short inner
Camber link inner - upper, outer hole
Camber link hub - (1 deg alloy hub) forward holes long
Roll bar - 0.9mm

Tyres - Yellow Mini Spikes all round - outer row cut off fronts
Inserts - Answer RC medium rears and firm fronts

Rudebits under speedo weight - 2 x 45g
Wing - VEGA High downforce
Vega steering link - to decrease ackerman and increase overall lock (available soon).

Motor - Tekin Redline 6.5 geared 24/kit spur
Speedo - Tekin RS Pro
Lipo - Orca 5200 45C saddle
Servo - Spektrum S6070
Receiver - Spektrum SR3520

Kev Lee