Tc6 carbon arm spacers - Feeler

[tc3nitro]

I am thinking of manufacturing some carbon arm spacers for the TC6 and wondered what kind of interest i would get if i sold these.
I've personally bent a few arm mount scews due to the amount of ali ring spacers i have used at the rear.
These would be the full lenth of the arm mount so they would support the mount fully saving bent screws and miss-aligned mounts.
They will be suitable for front and rear arm mounts.
They would be proper 5 sheet carbon with a gloss finish both sides and NOT cheap CSC.

The kit would consist of:
8x 0.5mm spacers
10x 1mm spacers
8x 2mm spacers

I would be looking at around £15 per kit posted
if you would be interested you can PM me on here