Dirt/clay set-up (low grip)

[V-Rossi]

We had a National on a dusty, low grip clay track today. Here is the set-up Wouter and I used (car was great!):

Front:
Orange spring, 30wt, orange piston, rod ends unscrewed 2 turns => tower middle, wishbone outer
Camber link 2-A with 1 washer, -1° camber, 0° toe
15gr of lead in nose
Proline M3 - Losi Soft Rib Pink (gave better steering and control than Red)
Long wheelbase (1,5mm longer than standard)


Rear:
Yellow spring (Wouter used Pink), 32,5wt, red piston, 0mm limiters, AE rod ends
Extra hole drilled in wishbone (about 6mm from standard inner hole on BK2 wishbone)
Old style XXX rear end with XXX-CR hubs (3 washers)
Camber link 2-B, -1,5° camber, 1° anti-squat
Short wheelbase
Wing: 7" big gurney, high
Rudebits brass T-plate + 40gr under pack
Losi Big Shot Red - Kangawallafox or Losi insert

I used Trinity 1° hubs, they improved forward traction and stability.