FS2 Shell done!!

[njc11]

Courtesy of Jon Miller..

http://www.rcsgraphicworx.co.uk/

Well chuffed with this new design shell.. looks much better than the FS in my opinion.

Also you dont have to use the 2 front body clips now... ive just used velcro along the side of the chassis and make do with the one clip at the back.

The front of the shell rests on the front shock tower, you have loads of clearance above the spur gear now as the screen is moved forward, the biggest plus is now the amount of room you get inside! You get a massive amount of space underneath now.. plenty of room around the motor and easily 5-10mm clearance above the speedo fan. Running chunky lipo saddles aint a problem at all now if you have them!

Ive cut the cooling holes out at the front of the car so i reckon now with the added space around all the components cooling is going to be massivly improved!!





All set for EPR!



Cheers

Nick