tame down db01 steering ??

[fastinfastout]

so I have a db01r, built to kit settings and the steering is just too much off power, and the back end rotates around too much so that its hard to go around corners unless I use very little steering input.

So far, I have used the smallest pistons & AE blue front springs to stiffen up the front end. Also moved one hole out on the front shock tower. 35wt oil.

On the rear, I have used 30wt oil, standard spring, moved one hole in on rear tower.

ride height 1mm higher at front at 23mm and 22mm rear.

front diff is tighter than rear, no slippage.

I will use a heavier oil in the front next time.

Is there anything else I can do to tame down the steering? Maybe front stabilizer?