Tamiya M-03, TA-01, Xray T2R spares etc

[pieman5]

Hi all, ive decided to have a bit of a clearout. IM LOOKING FOR A TRAXXAS RUSTLER IF YOU FANCY SWAPPING ANYTHING

First up is my Tamiya m-03 which is set up for racing IT IS NOT A SHELF QUEEN.

It has front CVD's, alloy lower and upper front arms, alloy lower rear arms, oil filled shocks, a novak xrs esc and a tamiya sport tuned motor.

It was raced for about 12 meetings and was very competetive, could keep up with some of the touring cars and i won 3 of my heats with it.

There are a few things i should point out. The central hole that the wires go through has been enlarged and so has the esc switch hole so that the novak xrs fits into it. Neither of these mods weakens it at all, it just makes it more usable.

It comes with 2 bodyshells, both battered (purple one is very used) and also comes with a small selection of spares

To run this you will need a transmitter, a reciever, a battery and a charger.

THE CAR DOESNT HAVE BALL BEARINGS AS I TOOK THEM OUT TO USE IN ANOTHER CAR, IT HAS THE STANDARD BUSHINGS.

Im looking for around £80 posted for this.








Next is my Tamiya Ta-01. I bought this with the intention of putting brushless and lipo in it and using it as a decent rally car. However, my stupid losi BL system decided to fail on me so its now up for sale.

It is being sold AS A ROLLER with no electronics. It moves very smoothly and has new front and rear diff cases, new rear shock tower, and a new spur gear. It also has a aluminium main shaft, alloy shocks and a aluminium motor mount.

The battery compartment has been filled down a bit to allow stick pack style lipo to fit.

The bodyshell is a brand new subaru shell fitted with a custom LED light kit (made by kieranbolton) I have taken a pic of this as it looks a bit messy from underneath as i used some tape to hold the wires down.

You will need a servo, esc, transmitter, reciever, battery and charger to run this.

Im looking for around £55 posted.










Next up is some Xray T2R spares that i have.

There is a complete front and rear end, 2 central plate sets, extra belts and loads of other bits including steering rack, decals, screws etc.

If you have a Xray T2R chassis, there is enough here to build a roller (apart from wheels)

All the spares are in good conditio, some are new in packet.

Im looking for £50 posted






Next up is a ansmann master smacker. this has only been run twice and is very smooth.

It has a 19t checkpoint money motor, a SX6R purple esc (4-10 cell limit and 12t limit) 2 sets of 3300 cells and standard servo.

It is in good condition, but a few areas on the chassis and servo have gone slightly white due to superglue residue.

Would be a nice starting basher, ideal for a park or field etc.

You will need a transmitter, reciever and charger to get this running.

Im looking for £70 posted.






Thanks