|
||
|
 |
|
||||||||||||||||||
|
#8
02-02-2010
|
||||
|
||||
Balls round the outer holes only
Place a smear of diff grease on the diff halve to keep the diff plate in place. The inner hole of the thrust bearing, one side is radiused, that goes to the head of the diff screw. If it is a new diff spring, compress in a pair of pliars, if not, tighten diff till it won't slip, bed diff in, test and adjust as necessary.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! 
|
| Thread Tools | |
| Display Modes | |
|
|
Tamiya
Threaded Mode