1.3mm and 1.4mm drill bits for your pistons

[Hulk]

Hi,

many of you may have seen from some of the set up sheets on the TD website that the front and rear pistons are drilled.

I drill the front 2 hole pistons to 1.2mm and the rear 3 hole pistons to 1.4mm.

Loads of people ask where they can buy the drill bits from to do this so here you go:

http://cgi.ebay.co.uk/PACK-OF-10-HSS...item2300b7cfa7

http://cgi.ebay.co.uk/PACK-OF-10-HSS...item29fd37847b



Craig Collinson