Quality/Missing parts issues?

[azure]

[QUOTE=mark christopher;291371]nortech have suitable pins, think 12.8mm fill the slot in the wheel!!
you colour has to be a miss match of different batches, but mine look like yours as do many in the other pics ive seen


Add mine to the list. Have shot them an email to mention it. I also felt the plastic around the front bulkheads, where the screws go in from the chassis was a little thin. I've got white marks going up the side where the screws enter the plastic and what looks like a crack on the right rear. Otherwise very happy with the build. Feels extremely XRAY or getting close - some parts were actually better. But for the most part, I'd say 9/10. I guess XRAY have the benefit of manufacturing in-house versus being a design house, so that they can spot many more of these issues.

I agree with everyones opinions on the drive pins. Have ordered some Schumacher SX pins on Jimmy's suggestion and hope that will remedy that issue.

Hopefully Durango will provide initial customers like us with a free service pack as they iron out these issues. Thats certainly the service that XRAY and Team Magic provide. Fingers crossed.