MR4BX Spares

[Benh]

Here Goes........


1 x Entire worth of car spares -

(Minus the 1 peice chassis - it's now a 2 peice chassis (the no-use-to-anyone kind of 2 peice chassis); Rear top deck; Hard Drive Shafts)


Includes
Rear upside down camber mod.
All the shocks, + spare set of shock shafts
Original rear Ali hubs (1degree)
3 Degree Rear Toe
1 x Tall "Bradby" Rear Shock Tower
Front Tower,
Steering linkage
Front Diff, Rear Diff with Ceramic Diff Balls and Thrust bearings
Centre Drive - Slipper with 87T Spur and Associated pads.
Spare Slipper plates, left and right
1 x BX-009 HARD SUSPENSION ARM PIN SET (Took one out to put new wishbone on remainder of
pack with above)
Front Belt
Rear belt
All Ali bits, including centre, front and rear bulk head components.
All the screws, bearings etc.
Internal Shock Spacers- Brand new.
1 x Diff Ring
1 x Spare RS-15 - Rayspeed Alloy Blue Spring Cup - Brand New.
Also Battery Posts and Carbon Fibre Straps.

£Offers for the above

Additional Spares -
1 x BX-415R05 0.5 degree rear ali hubs - Hardly used
1 x ZG503 DIff Pulley (only one left)

£Offers for the above


Additional Spares New and in Packets: -

2 x BX-008FG Front Wishbone
1 x BX-415S Steering Arms
1 x ZC-206SH Ball Studs - with Hex tops
1 x ZC-206LH Long Ball Studs - With Hex tops
1 x BX-351F Front Belt
2 x YS-7S O-Rings
1 x ZS110B Wing Mounts
1 x AS6468R O-Rings
2 x BX-508 Diff Adjusting Kit - Spring and Bolt
1 x BX-508T Diff T-Nut
2 x BX502 Rear Diff Joint
1 x YS-8Y Shock End Cap - Bleed Screws inc
1 x ZC-N4AFB Wheel Nuts in Blue
1 x ZS506 Diff Rings
1 x ZCN3AB Ali Nylon Lock Nut - Thin Type - 3mm Blue
2 x MR4 BX 03 Front Shock Tower
2 x ??? Rear "Bradby" Shock Towers (Taller) Will need the longer shocks shafts as listed above


£Offers for all of the above or will break it up.

Ideally, would like to sell the lot as a....... erm...... lot. I may not respond until tomorrow evening, but will answer any queries.