Yokomo BMax Champ Kit-Immaculate!!!!

[gazhillAE]

Yokomo BMax Champ Kit

Bought May 2009, built by myself.
Used at 3 outdoor DRY meetings only!
As new condition not a thing on it.
No marks on it either except for a small amount on the front bumper and front of chassis due to Southport Cobbles!

Reason for Sale-Been testing B44 and BMax together, both great cars but easier for me to stick with B44 due to running B4 aswell! No point in owning both anymore

This car is ready ro run and compete without having to do any further work i.e weigh down etc. It is ready to go, put your electrics in and off you go! Further info on what i mean see my post below:-

http://www.oople.com/forums/showthread.php?t=27102

May I also point out that I look after my RC equipment to the highest standard, each car gets taken apart after every meeting and throughly
cleaned so it is AS BRAND NEW condtion!

Only parts i have broken and replaced since using is a Front shock mount (Ryans) and front wishbone. Both down to my stupidity setting it up in the house!

What you get

*Yokomo BMax Champ kit inc box and manual
*Pro Painted shell
*Associated B44 blue alloy shock caps
*Associated B44 Shock screws, collars and nuts
*Associated B44 blue alloy battery posts and screws
*Associated B44 Carbon battery straps
*Associated Blue alloy thumb screws
*Ryan Lees Front Mount x2
*Ryan Lees Rear Mount x1
*Yokomo 3degree RF alloy inboard block
*Yokomo 3degree RR alloy inboard block
*Yokomo Lightened front diff outdrives
*Yokomo Lightened rear diff outdrives
*Yokomo front spring kit
*Yokomo rear spring kit
*Vampire Carbide Diff Balls (Front and rear)
*Polished drive shafts and prop shafts

The extras alone have cost me -£240!

Spares

*Schumacher Yellow mini spikes (1 meeting old)-1 set
*Associated B44 White Dish Wheels-1 set
*Anti Roll bar kit (Rear)
*Front shock mount-Carbon (Ryan mount)
*BM 017-Front shock mount standard
*BM 017-Rear shock mount standard
*BM SG81-81t Spur
*BM 003-Top Deck
*BM 670D-Slipper drive cup
*BM 501-Front diff outdrives
*BM 501-Rear diff Outdrives
*BM 670SP-Slipper adjusting kit
*BM 302C-Central transmission case
*BB-105-2-5x10mm bearings for front outdrives (x6)
*Non champ parts also which include shocks etc.

I am testing the water here i guess because if i dont get what i am asking for it i will probably keep for a while longer and use.

£300ovno