H7 PBS / H8.5 Pro / Hitec CRX 2.4 Ghz / H7 Chassis

[alien.46.uk]

Hyper 7 PBS


Good condition Hyper 7 PBS with plenty of upgrades and spares including:

On the buggy Includes:

• PCR Laydown Servo conversion
• Carbon Rear Shock tower
• Carbon front upper plate
• CNC Pro Ackermann
• CNC Pro Upper Hinge Plate
• Ally Chassis Brace
• Ally Wing Mount
• CNC Front Suspension Tower
• Spider Centre Diff
• New H8.5 Pro Special Brake Pads
• New H8.5 Pro CNC Brake Discs
• New Front White Springs
• Star Pin Fronts
• Star Pin EVO Rears
• New Engine Mounts and Spacer
• H8.5 Pro Wing
• Red Shock Covers

• Intellect 1400 Rx Pack (Hump)
• Nosram VTEC 1400 Rx Pack (Hump)

• Ansmann Racing W3 Tx and Rx set
• Futaba S3003 Servos (St and Th)

• Hyper 7 Pro Shoulder Bag

This is a very good buggy and fabulously solid. Will take a severe bashing with no effect and can still be competitive at club level maybe further, I don’t know. Never been that far =P …

The upgrades help bring it higher up the ranks and make it a very good looking buggy to boot.

It is in very good condition; however there is a small amount of grinding work done to the flywheel hole to allow the starter wheel to reach an 8.5 Pro flywheel.

It will also come with:

• New Hyper Tuned Muffler
• Integy Ally Hyper Air Filter
• Original Flywheel

• NIP Lower Front Arms
• Upper Front Arms and Balls
• Selection of Hubs Front and Rear
• Hyper 8 Pro Shell (crack to rear mounting hole)
• Original Shell (several cracks, but repaired and solid)
• Blue Front Springs
• Black Rear Springs
• Original Brake Set-up
• H8.5 Pro Centre Diff Mounts
• Carbon H8.5 Pro Centre Diff Cover (Will be fitted with new S/S bolts)
• New Engine Mounts Screws should you loose any
• Various other bits and bobs

Overall this is a very good package with plenty of upgrades and many spares to boot. This is a real bargain and just requires Engine to get here going.

The Diffs have all been rebuilt with fresh Oil and Seals (3k-5k-1k) and the shocks have fresh 35wt oil in them.

Price: £150 Posted