Brass LiPo Weights. B44, BX etc.

[Jonathan]

I am selling brass weights to fit in the chasis cell cut outs. I found they worked realy well and a few people asked about them so I decided to make some more.

They help return balance to the car if you fit LiPo's.

Stuck to the LiPo they help hold them in place.

They position the weight in the same place as the NiMh cells and as low as possible.

The weights are approx 12g each, fitting 6 adds 72g. This put my BX just upto BRCA minimum weight. If you want more weight, the same weights can be placed under the belt / drive shaft.

I have made these for my own Yokomo BX and a B44 with very good feedback.

To get a perfect fit they are a different size for BX or B44. If you want to fit them in another chasis then I can check for fit / make them to fit if you can supply dimensions.





Cost for 6 is £10 including P&P to UK

Can supply at Bury indoor for £8

(If I can cover costs then I will donate part of profits to the forum for placing the ad.)