CAT SX Shocks
Has anyone found that the shocks are a bit leaky? After I built the front shocks with 25wt I found the spring holder covered in oil after being left overnight. After I rebuilt them with 30wt it seemed to take longer to come through before the bottom of the shaft showed signs of oil. I have taken off the rear shocks to put o-rings to avoid the shaft hitting the diff output cups and fond the read shocks are showing the same issue. Not sure if I have done anything wrong as I followed the manual. Does anyone do them differently? Should I use some shock slime to help the seal?
|
25-09-2008
Schumacher
Threaded Mode