Kyosho Gallop

[tahustvedt]

I've got a Kyosho Gallop on the way and can't wait to restore it. It needs a bumper and most of the roll cage from the hoop forward. I found a good top down photo of the bumper so decided to try making a 3D printed one. The test print came out really good. It should be close to the right size since I used the cardboard bag labels as reference, but I will probably need to compare to the real car to get it perfect. If someone could give me some measurements off their Progress/Gallop bumper that would be awesome. I need the width of th ebumper at the widest, the thickness, the depth of the pocketed area and the dimension between the mounting screws (center to center).