X-60 uk starting set up

[steel]

As above anyone have a starting set up for a southport track or similar i can only find us ones

Cheers

[super__dan]

Originally Posted by steel

As above anyone have a starting set up for a southport track or similar i can only find us ones

Cheers

Your timing is amazing as I gave mine a run at York tonight having ran it at Robin Hood the other week, both times it was great.

[steel]

Cheers Dan

[steel]

Dan interested in the weight in yer notes you say (2/3rd full bay) ? what does this mean me thick

Cheers in advance

[super__dan]

No it's a good question, basically the roofing lead I use as ballast, it's a piece cut to fit in the space under the motor from the motor plate but becasue of the angles bracing at the back of the chassis, that 1/3rd? is cut off. I'll try to take some pictures later.

Also to note they are AE shocks and springs but with Losi pistons. I've just bought some of the bleed screw shock caps and they have made a massive difference (on the bench if not the track) as my rear shocks always had a ton of air in them.

[super__dan]

Areas of lead highlighted, actually the one underneath the pinion is a 10g wheel weight, the rest is roofing lead cut to fit. I can't honestly say I've done hours of testing with it, but it goes well. Motor is a 7.5 geared 20*76.