|
||
|
 |
|
||||||||||||||||||
|
#1
25-01-2010
|
||||
|
||||
Sc10 recommendations for gearing with a 7.5r - not for racing
Hi there.
Have a newly acquired sc10 that for the time being is going to be used pottering around. I have a 10.5 for this specifically for racing  In the meantime i have a spare novak 7.5r and im going to use this in the sc10 for a bit more poke. Using an 87 spur,where should i be looking to start with pinion ranges. For the 10.5 is was a 22 and 87 combo. many thanks. Col. 
__________________
TRF 501x - Tamiyafied Madrat - Bograt Rc10 FT T4 RC18T Lunchbox Gold X-6 squared Lrp, Novak, Robitronic, Ko Propo, Ezrun , Trakpower ,Team Scream, Demon, Microtech, Dms, Good old Jezza, Je-Spares, Bolton Model Mart, My Feedback http://www.oople.com/forums/showthread.php?t=25199 
|
|
#2
26-01-2010
|
||||
|
||||
|
hi
i am running a 21 on an 8.5 , reasonably small track but its fine , plenty of poke with decent top end , dont know the final ratio though
__________________
CML Distribution - Distributors of Quality Radio Control Models & RC Hobby Products
|
|
#3
27-01-2010
|
||||
|
||||
|
Hmmm and is ther any issues with heat or top end etc.
I started with a 19 and gave it a quick blast around he patio. Omg it's quite fast ans sets off like mad lol. The tyres are really good on the patio an it has so much turn in, it's like it's 4wd lol. Iv no done any high speed runs as yet, bu I will let you all know how it pairs up. Col.
__________________
TRF 501x - Tamiyafied Madrat - Bograt Rc10 FT T4 RC18T Lunchbox Gold X-6 squared Lrp, Novak, Robitronic, Ko Propo, Ezrun , Trakpower ,Team Scream, Demon, Microtech, Dms, Good old Jezza, Je-Spares, Bolton Model Mart, My Feedback http://www.oople.com/forums/showthread.php?t=25199
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
