XXX KINWALD OR XXX BK2

[ashleyb4]

If any of you want to pm me any pictures that dont exsist of the car that doesnt exsist.

A

[samd]

Id love to see a pic of nothing mid motored

[Chris Doughty]

OK... here is a quick picture, but this is the only one OK?

[lochness42]

Originally Posted by DoughtyUK.net

OK... here is a quick picture, but this is the only one OK?

It's ace
Now I understand all that mods on non existing car
Thank you Chris

[samd]

Wow, cant see any parts i know

[ashleyb4]

I was bored when i came home from college so i went in the garage for 5 minutes and set about with the dremmel and my tap and did this seems to hold together fine.....



A

[Lee]

Chris, you have far too much time on your hands


Ash, can you make that bigger?

[paulj]

Here is the description of the Hybrid that I built at the time, I'd forgot about it being referred to as a BK2.5, when I put it up for sale:

"For Sale XXX BK2.5 as Chris Doughty's TQ car from last 2wd National, built up from ground up around a brand new plastic chassis with graphite VLA arms, towers, new front plates, etc, Lunsford T/buckles, Ti screws, modified chassis with bulkhead cut out to move cells forward. Lunsford Ti kingpin ballstud front suspension mod. Trinity blue alloy front bulkhead-new, Trinity blue alloy rear hubs-new, Lunsford Ti quick tune suspension mounts.

Running Kinwald Edition (BK1) brand new transmission, gearbox housing, new blue alloy motor plate, new U/J driveshafts, full new gearbox internals. Built up with new Losi HD white ball ends, shocks have new Ti nitride shafts and cartridges with MIP blue o rings.

Check out Doughtys forum for more details about the mods run on the XXX, the car does not have the mods that move the steering pick ups on the chassis plate but everything else has been done."

Kind of wish I'd kept hold of that one now

[ashleyb4]

Sorry about the picture imageshack is playing up so i used a diffren one and it came out huge!!!!!

hehe just finished playing

Need some longer turnbuckles though





A

[jono83]

nice one ash i have got those losi truck turnbuckles so you can have them

[Chris Doughty]

I ran the outside hole on the inner camber link at the front

http://www.oople.com/rc/photos/telfo...ges/2wd42.html

and defo longest VLA setting on the front

[ashleyb4]

Did you always run the longest vla on the front?

A

[Chris Doughty]

yes, always longest front, and the hybrid option on the rear

[Gayo]

Now that it is history, could Mr Doughty or any of the then UK Losi drivers tell us a little more about the mysterious mid-motored XXX?
Or is it still classified?



That body was ACE

[Southwell]

Ash,

You can refer to the indoor setup i posted in this section, it is basically the same as Darren's but changed a bit. All i changed for outdoors was the rear springs and it went well.

[Chris Doughty]

Gayo - its got yellow wheels on it, it can't be mine...

[Gayo]

That makes sense. Sorry.

[Chris Doughty]

I do agree, that body is the bomb!

the BK2 is the best body, even beter without the side-pods

[Huw333]

Originally Posted by ashleyb4

A

Whats the advantage of having the ball stud there then?

[ashleyb4]

Ok chears chris i started out with sleighs sstarting setup he had them on short on the front unless ive got confused along the way somewhere.

A