Our go at a lipo X6

[janus_77]

You dont need to sand the bottom of the chassis, just put duc-tape on the bottom. Flip the chassis and fill the slots, and let it dry overnight.

if you desire you can push in lead inserts into the epoxy while it is drying. I use the sheet lead they use to seal roofs. when cut to size there about 18g. per slot (see 3rd pic). I have 4 of those, and got a 40g plate under the ESC

btw, I like you paint. Looks just like mine

[Big E]

Originally Posted by ashleyb4

Losi spur and pads AE spring plates still tryhing to figure out how to fit the losi slipper.

A

Just use the AE one..seems to work perfectly fine to me. Just make sure you run the white pads as the yellow ones are a little snatchy!!!

[ashleyb4]

Ok thanks for the help ill talk to jono see what he wants to do. Not even my car lol.

A

[jono83]

I havent had much run time with the car yet i dont see why the b4 slipper wouldnt be up to the job

[ScottyP]

Do the RW spurs fit straight onto the B4 slipper? What sizes do they come in?

Still waiting for the AE 72/75 spurs to be available so these might be an option.

Cheers,
Scotty P.

[jono83]

yeah it fits straight on but i am using losi slipper pads