|
|
#1
|
||||
|
||||
![]()
Recently got an X11 and I'm just wondering what the main set-up changes people do trackside? Also, what springs do people run front/back and what is the 'pick-up point on rocker' mentioned for the front suspension in the manual's chassis settings at the back?
![]()
__________________
The Badger of Peskiness ![]() |
#2
|
||||
|
||||
![]()
what track do you run on?
__________________
Matt Myers Team Associated b4 Team Associated b44 |
#3
|
||||
|
||||
![]()
Probably mainly astro, but certainly with a smattering of grass.
__________________
The Badger of Peskiness ![]() |
#4
|
||||
|
||||
![]()
this is what I ran at batley [astro with grass] courtesy of Northy
![]() Springs: 6t Pistons: kit + Valve Oil: 35 Associated Toe: In 1 Degree Camber: 2 Degrees Castor: 0 washer behind wishbone Ground clearance: 16mm Anti Roll Bar: None Rear: Springs: 5.5t/Gold Pistons: kit Oil weights: 50wt Associated Toe-in per side: 3 Degrees Camber per side: 2 Degrees Ground clearance: 22mm - or a little more if it cuts up. Anti-roll bar: None Rear lower upright: Upper Hole Damper pickup point: Middle
__________________
Matt Myers Team Associated b4 Team Associated b44 |
#5
|
||||
|
||||
![]()
Thanks for that.
Maybe some set-ups could be placed in the set-up thread. ![]()
__________________
The Badger of Peskiness ![]() |
#6
|
||||
|
||||
![]()
I will do that now!
![]()
__________________
Matt Myers Team Associated b4 Team Associated b44 |
![]() |
Thread Tools | |
Display Modes | |
|
|