DEX210 Steering help

[BD5]

Fitted a New Savox 1258 servo and can't seem to achieve full lock either way, i've even have the EPA to 120% and still no joy. Is there a way to adjust the steering linkage?

[AmiSMB]

Could you post a picture of the setup? Make sure that the link between the servo and the steering rack is level and that there is no binding on the servo horn between the link and the horn itself. I have a 1258 in mine without any issues.

[cornishboy176]

Originally Posted by AmiSMB

Could you post a picture of the setup? Make sure that the link between the servo and the steering rack is level and that there is no binding on the servo horn between the link and the horn itself. I have a 1258 in mine without any issues.

Ditto i have got a 1251 in mine with standard servo horn and got too much steering!!!

What servo horn are you using?

[BD5]

I raced at the weekend with a old prolux servo(stiff!) so i never really noticed if i achieved full lock but had EPA around 85% . Installed the new 1258 and noticed i wasn't getting to full lock but maybe i never was?

Originally Posted by cornishboy176

Ditto i have got a 1251 in mine with standard servo horn and got too much steering!!!

What servo horn are you using?

[AmiSMB]

Not trying to teach you to suck eggs but you have made sure that you are not using and dual rate or D/R? On my 3pk it is too easy to accidentally lower the dual rate and I have only recently worked out how to disable it.

[BD5]

AmiSMB,
You are right mate! Increasing my DR from 50% to 65% gave me full lock, i always thought that was just for increasing speed/sensitivity.
I had the prolux at 100% because it's a SLOW servo but this 1258 is super fast so lowered it!

[Rocking Donkey]

Originally Posted by BD5

Fitted a New Savox 1258 servo and can't seem to achieve full lock either way, i've even have the EPA to 120% and still no joy. Is there a way to adjust the steering linkage?

A longer servo arm should do the trick

[BD5]

Stock servo horn;