|
|
#1
|
|||
|
|||
![]()
I've just got a 2nd hand B4 an put a 9t motor in but hearing a squealing noise sometimes on acceleration, would this b the slipper clutch an does it just need tightening?
|
#2
|
|||
|
|||
![]()
Tighten up the slipper completely and see if it still squeals.
__________________
Supatraveller.com |
#3
|
||||
|
||||
![]()
could be also the dif if it isn't the slipper...
__________________
|
#4
|
|||
|
|||
![]()
Still squeelin a little but seems a little better
|
#5
|
||||
|
||||
![]()
Is your slipper fully tighten?
if so, it's your diff. simply take off your wheels and turnbuckles, remove your cvds. So you can acces the outdrives. mook where there is a bolt and tighten this one a little. and test again if still to lose tighten a little more
__________________
|
#6
|
|||
|
|||
![]()
Gonana have a go now but quite new to this after u've taken off cvd's what an where would I have to tighten?
|
![]() |
Thread Tools | |
Display Modes | |
|
|