|
|||||||||||||||
|
|
|
#1
|
||||
|
||||
|
Hi,
So I have a Spektrum DX3S and I can't There is a problem with the travelsettings I want to lower this because if I brake, it's just like you handbrake the car. And I run a B4.1 so it's pretty sensitive if I brake, it just flips around.. If I change this, to lower then 100% then the car just drives forward Thanks
__________________
|
|
#2
|
||||
|
||||
|
Ive had this sort off problem before mate.
What speedo do you have ?
__________________
|
|
#3
|
||||
|
||||
|
I have a LRP SXX Stock Spec v2 with the LRP X12 17.5motor.
__________________
|
|
#4
|
||||
|
||||
|
ive had that speedo too
look at the manual at the setting up process and reset the throttle, neutrul and brake setting and that should help. before when i braked the brake was far to sharp and it would just spin out. Once you have reset it just lower the brake % and it makes it less sharp and increase it for more brake.
__________________
|
|
#5
|
||||
|
||||
|
oke so 3sec on set button neutral press set, full throtle again set and brake again set and it should be ok?
__________________
|
|
#6
|
||||
|
||||
|
i just resetted it and i still have the problem when i turn the travel of the braking lower then 70% the motor spins...
hmm
__________________
|
|
#7
|
||||
|
||||
|
__________________
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|