FrSky 2.4 in a Futaba

[DCM]

I was wondering if there would be any advantage in my 3VC converting over from Spektrum Pro to a FrSky system, will I get faster response times?

[john333]

mine seemed faster, and the tiny little receiver fitted in my SV2 much better. Also my old Spektrum gave me a bit of interference every now and then.

I would highly recommend it!

[deepdale11]

Originally Posted by john333

mine seemed faster, and the tiny little receiver fitted in my SV2 much better. Also my old Spektrum gave me a bit of interference every now and then.

I would highly recommend it!

I would like to know more about this FrSky in a Futaba, any pictures of the recevier and where do you buy them from?

Thanks

[styleone]

Originally Posted by deepdale11

I would like to know more about this FrSky in a Futaba, any pictures of the recevier and where do you buy them from?

Thanks

I did use these little monkies for a short time when I ran a Futaba 3PL...as far as I can remember you can grab them very cheap over on hobbyking.com...bit longer on postage but cheap. They are super small and come with 2 areals!!

Good value and work spot on from my short experience

[JCJC]

are these the bits, http://www.giantcod.co.uk/frsky-24gh...-p-405206.html

http://www.giantcod.co.uk/24ghz-frsk...-p-404806.html

Receiver is small and light, a bit open and end connect, cheap as well.

[john333]

Yes they are the ones. You can also buy a plug in module to save fannying about wiring the hack module in but wasn't in stock when I looked. I found the end connections on the receiver no problem at all, in fact it made my install much neater.

To give you a sense of scale for the receiver, the aerial in the picture is less than an inch long.