High mounted DEX210 rear wing

[lovechild]

What parts are needed to do this?

[OneKiwi]

I used a set of the 410 wing mounts and not real stable or supported and as yet untested.

Hopefully someone releases one soon, like what Jörn is driving

[madap1]

you'll need the rear bulkhead set TD330009 and some wing washers and m3 screws. for wing washers, i and a few others have used the 408 wing washers

http://www.rccarshop.co.uk/index.php...nium-2pcs.html

Mark (tc3nitro) has put some pics up on here so you should be able to roughly see where to cut the rear bulkheads. Also you will have to dremel the side that goes against the tower flat. Its good mod, transformed my car making it stabler in corners making it easier to drive.

hope thats helped.

[tc3nitro]

This is what i used :

http://www.rccarshop.co.uk/index.php...khead-set.html

If you look at my Jconcepts Finnisher thread then you can see a few pictures of how they were cut.

Mark

[tc3nitro]

Here you go !

[lovechild]

ok thanks. have you noticed much difference running it?

[hotrodchris]

Don't suppose anyone has tried this along with the rear shock mod?

[tc3nitro]

Originally Posted by lovechild

ok thanks. have you noticed much difference running it?

It has certainly helped find more rear grip.
I ran a cab forward body on my 210 at Robinhood at the weekend, it had mega steering but the rear had plenty of grip.
This mod along with a small spur moving the motor back has really transformed the car.

I personally have not tried mounting the shocks on the rear of the arms and don't know anyone who has tried it with these other changes.

Mark