KO Propo Vantage Esprit II conversion

[PaulFarrand]

Hi,

Does anyone know if the KO Propo Vantage Esprit II can be converted to 2.4ghz. If so, how much will it cost and who is able to do it.

Cheers

[john333]

Originally Posted by PaulFarrand

Hi,

Does anyone know if the KO Propo Vantage Esprit II can be converted to 2.4ghz. If so, how much will it cost and who is able to do it.

Cheers

Give Cardnim a shout on here, he does them for a fantastic price

[cornishboy176]

I have just converted mine to 2.4 using the FRSKY hack module,just 3 wires to solder I can send you some pics and instructions if you want it was very easy to do,hack module and rx was 30.00 delivered from T9 Hobbysport

[PaulFarrand]

Cheers Iain, if you could send me the pics and instructions that would be great....

[Cardnim]

You can get the module and receiver from GiantCod delivered for 25 quid.
I charge 45 for it all in (thats the module and rx as well) but its easy enough if you are good with a soldering iron - hardest part is mounting the module correctly so the led and bind button look good and you dont mangle the transmitter.
Ive seen an online guide that put a hole right through the front panel of the KO Esprit II nameplate - yuk!!!

If you need any help mate, give me a shout.

[U1timate PigDog]

Thats cool I was thinking about doing something like this, anyone got any pictures of one finished/modified.

Hi personally dont have any issues with 40mhz especially since no one really uses it other than me anymore LOL, I dont ever have to switch crystals.

What are the benefits of switching from 40mhz to 2.4?

[szymanski2oo1]

i just stumbled upon this thread...... i have a ko esprite 2 and also a sanwa gemini exert transmitters...... are you still converting them, either of them? if so i would like to get one of them done ( either will do )

let me know if you can help

kind regards

jon

[email protected]

[szymanski2oo1]

Originally Posted by Cardnim

You can get the module and receiver from GiantCod delivered for 25 quid.
I charge 45 for it all in (thats the module and rx as well) but its easy enough if you are good with a soldering iron - hardest part is mounting the module correctly so the led and bind button look good and you dont mangle the transmitter.
Ive seen an online guide that put a hole right through the front panel of the KO Esprit II nameplate - yuk!!!

If you need any help mate, give me a shout.

i just stumbled upon this thread...... i have a ko esprite 2 and also a sanwa gemini exert transmitters...... are you still converting them, either of them? if so i would like to get one of them done ( either will do )

let me know if you can help

kind regards

jon

[email protected]