|
|
#1
|
||||
|
||||
![]()
Hi i have a B4 and i am wondering if i can run a Li-po battery without changing the motor and/or the SC. The motor is a Reedy 17-T Radon and the SC is a LRP Ai automatic.
Cheers |
#2
|
||||
|
||||
![]()
Technically, I am sure you could run those electrics without any problems with it working, however, they are not 'competition' grade electronics, so you may suffer with some longevity issues with overheating, (especially the motor) since it was not designed to handle the current that a li-po can give out. If you are bashing, it maybe worth looking at a sensorless brushless system (motor and speedo), such as Tekin make. These are virtually maintenance free, so just need brush cleaning out occasionally.
HTH Mark
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint :: |
#3
|
||||
|
||||
![]()
Make sure your speedo has a lipo cutoff setting and if not, then install a seperate one.
And keep an eye on temperature... |
#4
|
||||
|
||||
![]()
youll be fine
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#5
|
||||
|
||||
![]()
Cheers mark, ive been thinking of getting one of the Green Venom li-po's. If my electrics mess up its just an excuse to get a brushless system!!
![]() |
#6
|
||||
|
||||
![]()
have a look at trakpowers too,
two things 1st is a must, make sure you have a lipo charger as a nimh/nicad one will NOT do look at getting a lipo cut off if your speedo does not have one installed
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
![]() |
Thread Tools | |
Display Modes | |
|
|