Centro c4.1 diff

[ads_sar]

Hiya, I am in the process of putting together my c4.1 kit. My b4.1 diff doesn't fit, the instructions show a sc10 ball diff. Should the kit contain this or is it something else I gotta buy!

Cheers

[MiCk B.]

The kit was designed for the B4.1

So you will need a B4.1 diff out drives and bearings, which are metric.

These are not included in the kit.

MiCk B. :-)

[ads_sar]

Cheers, I have the b4.1 but my diff is different?!

[highlander]

sounds like you have an imperial set of outdrives on your b4 diff ... the newer metric outdrives have a dimple as such on them as well as the driveshaft slots... hope that makes sence.....

[peetbee]

Have you got the gear diff in your B4.1?
If so then it won't fit straight in as it's been designed around the B4.1 ball diff that comes in the FT version.

[Steven Forster]

Thought the B4.1 and SC10 ball diff were the same both with the metric bearings and outdrives..........