trf201 anti squat!!

[guinness]

Is the rear antisquat on the TRF201 0 degr when builded as for manual with the 1mm shim under the front block ? Thanx

[pugs]

I would imagine that being tamiya that the 1mm shim will give 1 degree anti squat, I could be wrong on this but it looks that way

[guinness]

Is there any info regarding the blocks configuration??

[knighthawk]

Ask Lee Martin in the 'Ask Questions' here in the Tamiya section

[wildwillydriver]

Got this from RC-Tech forum: Jimmy Wright explain Antisquat


Using the stock plastic blocks & 1mm plastic shim (J1, J5 & J7) will yield a 3 degree anti-squat.

Here is the "guide":

J5 and 54243 (upside down) 2.0*
J5 and J1 (no Shim) 2.5*
J5 and J1 (1mm Shim) 3.0*
J5 and J1 (2mm shims) 3.5*
etc etc

J1 can be replaced with 54243
J5 can be replaced with 54242, 54291 or 54292 (no shims needed as they have 1mm built in)
----------------------------------------------------------

Hope this help.
WWD

[guinness]

So if i want 0 antisquat what would be the combination?