|
|
#1
|
||||
|
||||
![]()
Is there likely to be a kit update for the 210 like shumacher did with the sv (2011 spec), I appreciate the sv had more initial gearbox problems just wondered if there was going to be a revised diff released with the 210?
|
#2
|
|||
|
|||
![]()
Whats wrong with the current diff ?
__________________
Kyosho RB6 |
#3
|
|||
|
|||
![]()
Yes it's called the gear diff
![]() ![]()
__________________
|
#4
|
|||
|
|||
![]()
I don't see what the problem is with the ball diff i have two 210's and both diffs are fine
![]() |
#5
|
||||
|
||||
![]()
I had a problem 1st run. turned my clip around and widened it before insertion and it's never slipped since.
|
#6
|
|||
|
|||
![]()
The problem I seem to be having is that the diff seems to slip mid race. I had the circlip issue first time out but that was probably down to me not fitting it correctly but since i replaced the clip it just slips.
I tighten the diff then after a couple of minutes of racing the diff is slipping, to the point on saturday night that the car wouldn't move, when I felt the diff after the race is felt really tight like it does when the circlip pops out, but when I stripped it down the circlip was still in place. The only other thing i can think of is the nut that holds the diff together threadlocked, if so it maybe worn ![]()
__________________
|
![]() |
Thread Tools | |
Display Modes | |
|
|