Sanwa Exzes in Aero

[DaveG28]

Anyone tried fitting this receiver?

Or any others, other than Spektrum micro??

[Lee]

Dave, i use the little KO one that comes with the universe transmitter.

[DaveG28]

Hi again mate,

is that the 40mhz it comes with?

I built the steering rack on my kit and the futaba won't go in there!

[Cooper]

Simon Bettens drives Aero with a Sanwa thing, I'll ask him or maybe he'll be here and answer you before I got the chance.

[Lee]

Yes dave its the one you get as part of the package.

I would also get yourself a couple of pairs of b44 wishbones the aero fronts are like cheese, i broke 1 in a year on the bj4 and i have done both fronts on the aero in 5 packs of cells

Its an easy mod just run a 3mm drill through the holes where the hinge pins go and take off the little knob, at the abck of the wishbone, you will see where i mean.

[jimmy]

I did 6 bj4we wishbones at one meeting! tamiya ones are where it's at

[Lee]

Originally Posted by jimmy

I did 6 bj4we wishbones at one meeting! tamiya ones are where it's at

Impressive

[super__dan]

Originally Posted by jimmy

I did 6 bj4we wishbones at one meeting!

That's not something you should boast about

[jimmy]

Originally Posted by DaveG28

Anyone tried fitting this receiver?

Or any others, other than Spektrum micro??

the 40mhz blue cased Sanwa I have won't fit in, ever. But the smaller black cased ones will - have a look at my other post.. I'm sure you already did it anyway but hey!

[DaveG28]

I went micro in the end Jimmy as when I mocked it up on full lock the steering fouled the receiver, but when I then attached the suspension/servo (having sold the sanwa and bought the micro!) I realised that you don't really use all the steering link lock in reality so it would have fit all along, doh!!

By the way, I think (haven't tried it but looked) if you use an R1 esc and mount it upright then the futaba 2.4 receiver will fit in between the servo and esc!