|
|
#1
|
||||
|
||||
![]()
Hi Guys,
OK, I'm almost fully sorted. I've bought two V12's, 60Amp ESC 13T brushless combo's and Savox 1215MG servos. I'm just stuck on li-op's. My club have no rules for running these cars, so anything goes. I'm hoping 13T is to much, so I can turn the throttle curve down (like I do on my 10th buggy). The 60Amp ESC means it can be used with other stuff if I want. So the last thing I need to get sorted is what number cells to run, 1 or 2s ?? With the 13T fitted at 100% throttle will 1s be under powered ? If yes, I'll go 2s and turn the power down. I'm hoping 1s will be more than enough as it means I can buy half the number of packs I need, because I'll be buying saddle packs ![]() ![]() Thanks. Rob. |
#2
|
||||
|
||||
![]()
Bought 8 packs of 4.8v 'C' cells today.
|
#3
|
||||
|
||||
![]()
2's lipo would have been better but 4cell nimh would be just as good for what you plan to use.
Just make shure you look after nimh's by equalising every now and then and they should last you years. mine are onto 2 and a half years racing twice / three times a week so all in all 800+ races ![]() |
#4
|
||||
|
||||
![]() Quote:
|
#5
|
||||
|
||||
![]()
I spoke to Mardave today and asked, 2s is doable, but you are looking at 17.5 or 21.5 brushless.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#6
|
|||
|
|||
![]()
2 cell 21.5 brushless is very close to 1 cell 13.5 performance wise
|
![]() |
Thread Tools | |
Display Modes | |
|
|