|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
11-03-2008
|
||||
|
||||
chassis protector
anyone know the make/part number for the tape like chassis protector stuff you stick on chassis's??
__________________
AC S4-LRP SPHERE TC-KO2123-NOVAK 5.5L B4FT-NOSRAM EVO-KO2123-SPASHETT 10x2 http://s343.photobucket.com/albums/o...-rugby-new.gif 
|
|
#3
11-03-2008
|
||||
|
||||
|
cheers phil
does anyone actually use this?? is it worth the money?
__________________
AC S4-LRP SPHERE TC-KO2123-NOVAK 5.5L B4FT-NOSRAM EVO-KO2123-SPASHETT 10x2 http://s343.photobucket.com/albums/o...-rugby-new.gif
|
|
#4
11-03-2008
|
|||
|
|||
|
Don't you skimp on that stuff chris, it'll keep it nice and shiny and new
  . It does wear, but it saves screw heads and chassis wear really well. Try an mx shop, it's the same stuff graphics are made of, so they may be cheaper.
|
|
#5
11-03-2008
|
||||
|
||||
|
B&Q sell the clear film in a roll and its far cheaper, plus you get loads. It is thinner than the AE stuff, but it serves the purpose - might mean it needs replacing more often, but it'll still be cheaper.
I use this stuff to insulate carbon chassis where the motor and cells may touch.
|
|
#6
11-03-2008
|
|||
|
|||
|
Hey Chris (losixxx),
Scroll down a bit on this link, good shop to deal with. I used this stuff when i did mx, very tough and you can get it in CARBON  . The backgrounds would work too, same stuff.http://www.racespec.co.uk/acatalog/Backgrounds.html
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
