|
|
#1
|
|||
|
|||
![]()
Durango DEX210 rear carbon camber link plate
![]() Hi all I have been testing a new rear camber link plate for the last month or so along with a couple of other people. We have found it to give a lot better balance to the car on high grip tracks in the mid motored configuration! Helps the rear end not to collapse in the corner as much due to being able to run a shorter link! You do have to Dremel the old mount off the gearbox but the new plate has the standard hole in as well. It should also fit the rear motored setup but I have not had time to try this yet but will over the weekend. I will be making a batch next week and want to gauge some interested in the part. They will be £7.50 posted if you are interested in one could you Pm me ![]() ![]() ![]() ![]() |
#2
|
|||
|
|||
![]()
i saw a guy using a schumacher one so this should be a good job?
|
#3
|
|||
|
|||
![]()
Yeah a couple of ex schumacher guys saw my plate and then said an sx3 one might fit. I think you have to bolt it on top and mount the ball stud on the underside. But I could be wrong to be fair.
|
#4
|
||||
|
||||
![]()
hope you can confirm if this will fit for RM configuration and also pics.. then it'll be great.
thanks. |
#5
|
|||
|
|||
![]()
Hi i am going to try it tonight so will let you know tomorrow
|
#6
|
||||
|
||||
![]()
Hi Nick,
hope you can share some pics for this product in Rear Motor Config, (will combine mine with the rear tower) ![]() |
#7
|
||||
|
||||
![]() Hi Nick, will these work for RM configuration? any pics? thanks, Jun. |
#8
|
||||
|
||||
![]()
Nick you need to empty your inbox mate
|
#9
|
||||
|
||||
![]()
Nick, if you have any more going could you send me you details and i'll send you the dosh!!
after you empty your inbox that is!! Cheers Jay |
#10
|
||||
|
||||
![]()
Looking at his profile the Last Activity was: 09-11-2012
|
#11
|
||||
|
||||
![]() Quote:
Dave.
__________________
CAT L1 B6.1D Dex 210 FTX Vantage Cen FF.NT |
![]() |
Thread Tools | |
Display Modes | |
|
|