|
|
#1
|
||||
|
||||
![]()
I built a new x2c today and it is sounding very rough, could it be the ally idlers or does it just need to break in?
Thanks Sam
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#2
|
|||
|
|||
![]()
They are a bit noisier. Use a bit of grease and it should be fine. If its loud check the diff and slipper are working properly.
|
#3
|
||||
|
||||
![]()
its making a slipping noise but diff and slipper are tight then when i let off it makes a sort of clicking noise.
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#4
|
||||
|
||||
![]()
If I were you I'd take the gearbox apart and clean all parts to make sure they are ok and rebuild again. Its better to be safe than sorry. If you've put metal gears in, one of them could have a bit of fash on it or something.
|
#5
|
||||
|
||||
![]()
Ive got all day tomorrow so ill take apart tomorrow, everything is new apart from idlers and bearings in idlers. Ill change bearings and make shore nothing is missing or faulty.
Thanks guys
__________________
Sam Harris Serpent Spyder SRX-2 MM
|
#6
|
|||
|
|||
![]()
Did the old gears get chewed up? Chances are there is still some plastic stuck in between the teeth of the gears. Only takes a small amount to make it noisy and rough
|
![]() |
Thread Tools | |
Display Modes | |
|
|