Dex410v3 RR suspension hanger

[Scotty15]

Hi all

Just a quick question about the RR suspension hanger td330307 http://www.team-durango.com/part-inf...artNo=TD330307 I am looking at getting one to fit on my Dex410r(2010). Looking at it I cannot see why it wont fit as all the parts around it are the same. But I just wanted to check with any of you other rango drivers who might have done the same mod.

Andy

[Big G]

although I haven't done this myself. I am 99.9% sure it will fit no problem.

[Scotty15]

Hi Big G

That is my thought but just wanted to put the question to a wider audience.

Andy

[jimmy]

Hmmmm, it looks like it's a mistake that it's not listed as an option for these cars. Team drivers were using them during the year on older cars.

[Dazzler]

I've fitted it straight on my 2010 full fat kit, but two things, first, you need to order the plastic inserts as well as the alloy brace.. and secondly, if the 410r doesn't have the spheres at the end of the hinge pins, you'll need those too.

[Scotty15]

I noticed it was not listed for the older 410's but just thought that was to stop us just adding the new trick bits and not buying the new v3 kit. But I am sick of waiting for the kits to arrive it just seems easier to get the bits and keep my older 410 as it is a good buggy. I have rebuilt the rear end after a bad jump killed the rear supports etc so I have spare spheres and shims. I have found the hanger and the shop also supply's the inserts with it.
Andy

[Dazzler]

That'll get you sorted then, there's no compatability issues or trickery going on..