|
|
#1
|
||||
|
||||
![]()
hi there just wonderd wich you guys thinks best for out door racing dbo1 or 501x
![]() |
#2
|
|||
|
|||
![]()
A 501 is more suited to racing.
|
#3
|
||||
|
||||
![]()
but your db01r is so nice lsdevey
|
#4
|
||||
|
||||
![]()
In my opinion, the 501
__________________
B-Max 2 MR
KEEP RIGHT ON BLUE IS BETTER ![]() |
#5
|
||||
|
||||
![]()
Both are great. I ran the 501X and DB01 (not R) for a long time. I lost belts to stones on the 501X where the DB01 had no problems. The DB01 isn't as adjustable but I think it can be just as fast.
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. ![]() |
#6
|
||||
|
||||
![]()
iv got both cars and one has to go so if you can give any advice its very welcome
![]() |
#7
|
|||
|
|||
![]()
I have no a 511 and a 501x, but I have read their instructions, then I discover that there are so few differences between them, a 511 is very slightly better than a 501x, and the design of the upper deck of a 501x is much stronger than that of a 511, so a 501x may manage more rugged roads. Besides, it is nearly three years, that is a bit long before the next same driving system TRF car is released, since a 511 was released, so I think that the new TRF car is going to be released before long and now is the suitable time to look forward to it instead of upgrading a 501x into a 511. A 501x is designed for races, so of course is better than a DB01R. I should sell the DB01R keeping the 501x until the new TRF car is released. All of the above is my dull opinion.
|
#8
|
|||
|
|||
![]()
They did! Its called a 502x.
If you're talking about the next belt TRF buggy to be produced by Tamiya, well, I dont see one coming anytime soon. I think Tamiya is going to continue shaft drive development with its buggy designs from here on out; ie. DB02 and TRF512 etc... Its a shame, if you ask me, because I like belt drive for good reason. ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|