fs2 sp faults?

[450kid]

anyone else have trouble with the front shocks catching the camber links and the rear drive shafts not going far enough in to the drive cups?

[tisher]

you have to space out the shocks by 2mm

[450kid]

ive put 5mm spacer on shocks so it dont touch
and also at the rear if i move the blue spacers to the inside it makes the rear end 4mm narrower which does not seem right

[adam_u]

have you got the right inserts in the ali pivot blocks at the rear? - also have you got the shim on the driveshaft on the inboard side of the hubs? - shows as 96643 on the exploded diagram - I don't have the SP so only going off this and I know there's a driveshaft revision

[450kid]

Got the shim on the Inboard and the right bush in the right way. Round?

[sime46]

Hi. the team are running the rear driveshaft spacer inboard now which does narrow the rear track but does improve the handling. The front shocks need 2mm spacer on the top end in certain camber link positions. I'm using the rear position on mine and the shocks easily clear without spacing. Hope this helps.