Servo Horns..

[kwiksi]

Can someone tell me if the DEX410 and DEX210 use the same servo horns?

[captainlip]

you can use any servo horn, I used a racers edge servo horn, which looks miles better than durangos effort tbh, thats if your a poser like myself

[gainsy]

Originally Posted by captainlip

you can use any servo horn, I used a racers edge servo horn, which looks miles better than durangos effort tbh, thats if your a poser like myself

Not sure about the 410 but the 210 will need a horn of similar size to the standard 1, much longer & it will rub on the steering arms underneath as i found out when i tried my losi 1, the losi 1 is 27mm long & the standard 210 1 is 23mm long, so i would say no longer than 25mm should be fine if fitting a alloy version
My above info relates to it being fitted to a savox 1251mg servo, not sure if other servos are different
HTH

[Dazzler]

They are different, the 210 one is shorter.

The official TD Alloy servo horn may fit both as it has two positions. An e-mail to TD may clear this up.

http://www.team-durango.com/blog/201...m-servo-horns/

[captainlip]

the racers edge horn is short as it has to go under the 410 driveshaft

this beauty

http://www.amainhobbies.com/product_...-Hard-Anodized

ive kept it to stick in the 408 when its out

[mark christopher]

Originally Posted by Dazzler

They are different, the 210 one is shorter.

The official TD Alloy servo horn may fit both as it has two positions. An e-mail to TD may clear this up.

http://www.team-durango.com/blog/201...m-servo-horns/

clearly says its for 8th!!

[Dazzler]

Thanks for your kind words, I have looked again and can't see that myself. But hence the suggestion of dropping an email to be sure. Maybe you could let me know where abouts the 1/8 th info is on the page linked?

[wacattack]

Originally Posted by Dazzler

Thanks for your kind words, I have looked again and can't see that myself. But hence the suggestion of dropping an email to be sure. Maybe you could let me know where abouts the 1/8 th info is on the page linked?

Hi mate, if you go to the page specific to the servo horn then it says at the bottom it is for the 408...

http://www.team-durango.com/part-inf...artNo=TD340064