No Voltage in cell.

[strobe]

I have purchased 2 sets of SMC EnerG 4600 Cells. Built them up today and charged them. Whilst charging i noticed that it was at 7.34 volts. Took it off charger and checked individual cell voltage. 1 cell has no voltage output. Any way of trying to put a charge into this cell or does it need replacing.
Any one know who the Distributor is for SMC Cells.

[bert digler]

Originally Posted by strobe

I have purchased 2 sets of SMC EnerG 4600 Cells. Built them up today and charged them. Whilst charging i noticed that it was at 7.34 volts. Took it off charger and checked individual cell voltage. 1 cell has no voltage output. Any way of trying to put a charge into this cell or does it need replacing.
Any one know who the Distributor is for SMC Cells.

mark do you have matt simpsons number if so he knows how to start em up i think he charges them on there own at a mad rate for a few seconds

[showtime]

i had some advice from a cell supplier once that said to try & revive a dead cell by flasing it on a 12v battery

not sure i'd be 100% confient doing that with todays cells tho

i suppose you could solder on some wires & put the cell in something just to be safe/er

[bert digler]

Originally Posted by showtime

i had some advice from a cell supplier once that said to try & revive a dead cell by flasing it on a 12v battery

not sure i'd be 100% confient doing that with todays cells tho

i suppose you could solder on some wires & put the cell in something just to be safe/er

cool i hope the brca safety officer aint readin this else youll need hi vis vest wellies and goggles lol

[showtime]

i'll have a quick look around & see if i can find where it was written so you can blame somebody else if it goes to critical mass

[strobe]

Hopefully Neil Oliver will be at Coventry tomorrow and will know what to do, if not Bert i will get Matt Simpson to have a look.

[DCM]

why don't you just send them back to the vendor you bought them from?