losi 222 piston and oil combo

[cryer-evo]

hi all could all of you put your piston /oil/spring set ups for your losi 22

i am running out door on astro/ grass very bumpy as is normally a 1/8th rally cross track

front 55 piston 27.5w oil red spring
rear 55 piston 20w oil yellow spring
ride hight front 18/19 rear 20

jumps completly flat and level soaks up bumps very well very easy to drive

indoor tight carpit track small jumps
i am running
front 55 piston 27.5w oil silver spring
rear 55 piston 27.5w oil yellow spring
ride hight front 8/9 rear 10/11

jumps well terns well but still grip rolling abit

[kayce]

Originally Posted by cryer-evo

ride hight front 8/9 rear 10/11

[cryer-evo]

basically it is as low as it can be shock collers up as far as they can go so no tension on the springs

[kayce]

rideheight that low, makes no sense whatsoever

[cryer-evo]

the jumps at the indoor carpet track are only about 2" hi so dont get a lot of hight of them and if i have it at any higher it just grip rolls at every corner

[kayce]

Originally Posted by cryer-evo

any higher it just grip rolls at every corner

Sorry, but I have a sneaking suspicion that you aren't using an accurate ride-height gauge and/or don't truly know how low 8mm actually is..... and you sure seem to be doing a lot of mentioning of grip-rolling in multiple threads, that nobody else seems to have the depth of problems with it you do.

I've yet to grip-roll or traction roll mine, ever - and it suggests you're doing something really wrong.