can losi wheel hexs fit a zx-5

[hummer11]

I was wondering if Losi or some 3/8" hexes will fit on the front of the zx-5 sp

Does any one kno of some other 3/8" hexes other than Losi

Like ones that go over the pins not under like Losi or associated

[RogerM]

I know some people have used the Hot Bodies front ones but they had to modify them to wor.

The simplest way is to reduce the standard kit parts from 12mm to 3/6" across flats.

[bjcaldwe]

Ive done it both ways. If you reduce the stock hex, ensure you keep the hex shape... lol .. I could probably do better now that I have a vice to hold it.

[hummer11]

so the Losi hexes work then?
I have a vice and a dremal at home

[RogerM]

The Losi hexs are way too thin .....

You need to go for something the same size hex but thicker ....... HB ones have been used by a couple of people.

[hummer11]

I dont like the idea ofcitringthestock ones the would probobly come out bad
LOL I could line up the stock ones with thewheel and ca glue them

So the hot bodies ones fit with some shims and stuff?