Reduce body roll

[deano261]

How can I reduce body roll in the mad rat. I have associated b4 shocks on it at the moment.

[Tom3012]

Make the inside camber links higher... So on the rear out of the four holes on the inside camber link, go to the short, higher hole... On the front try putting a 2mm washer under the ballstud in the bulk head...

Hope that makes sense?

Tom

[deano261]

will shorter springs (around 45mm also do the trick as im currently running 70mm ones which came with the b4 shocks

[Robbiejuk]

Spacers inside the shocks to get rid of some of the droop? Outside hole in bottom wishbone.

[madmax]

their is a few ways in doing this, the first way is raising the inner links like what tom said, you can also move the shocks out on the wishbones or stiffen the suspension

but why do you want to reduce the role? is car grip rolling? and what surface are you running on? what is the ridehight

[deano261]

its just that it is constantly on its roof around the fast high grip corners and im running on carpet at the moment