|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
11-10-2011
|
|||
|
|||
Dex210 Arrived!!
Picked up today from MB models and started building as I am off work today
 As I am building there seems to be a few screws and washers missing in the bag in line with the instructions. Will keep building and see if they are in a different bag as I go along. If anyone else finds the same problems let me know. So far missing 705005 x 2, 709032 x 2, and 704007 which I have but is not threaded. 
|
|
#2
11-10-2011
|
||||
|
||||
|
So is it a complete kit? does the instructions say it's missing bits?
__________________
 A rc car is not just for christmas, it's for life
|
|
#3
11-10-2011
|
|||
|
|||
|
No it's a complete kit. The bags are labeled A, B,C etc so as you follow the instructions you use the parts from each bag. The problem is that there are a couple of screws and a couple of washers missing from the bag they are supposed to be in. It may be that I have some left over from other bags, that match the ones missing at the beginning. I'm only up to page 19 so will see when I continue build later on. but at the minute I am missing the screws and washer that hold the front axal in the hubs and a screw from the underneath.
|
|
#6
11-10-2011
|
|||
|
|||
|
Quote:
 only have imperial screws in my limited spares box lol
|
|
#7
11-10-2011
|
||||
|
||||
|
What are the size's of the drivers you have used for the build? im coming from imperial so want to get the right metric sizes
__________________
A rc car is not just for christmas, it's for life
|
|
#8
11-10-2011
|
|||
|
|||
|
Yes everything are in separate bags just not the correct amount so far. Also when screwing the camber ball joint balls to the front wishbone don't overtighten them as I have split one of them already as when using the Allen key screw driver, you can't screw it in straight as the top wishbone hanger is in the way, page 15 left hand diagram. Probably better using short end of a regular Allen key.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Team Durango
Hybrid Mode
