|
|
#1
|
||||
|
||||
![]()
Hi guys,having problems with my x6squared when coming out of the corners the inside wheel is lifting of the ground and spinning up so then it is slow out of the corners,my setup:
35 w oil,losi red pistons,2/2 shockmounts,blue springs 30 w oil,losi red piston s,1/1 shockmounts,blue springs V2 shocks Been having this problem outdoors,now winter is here the problem is worse running indoors Cheers chris |
#2
|
|||
|
|||
![]() Quote:
|
#3
|
||||
|
||||
![]()
Have you tried a rear roll bar? If not the how to' is on page three. It works a treat to be fair,also take a peek at the Ellis setup on petit as this is about as dialed as it's possible to get and works great.
|
#4
|
||||
|
||||
![]()
Also forgot to mention the slipper adjustment as this is critical on the x6. As per the x factory website I run it looser than say a b4 and it keeps the rear end in check, also have you got the espeed rear hangers?
Probably forgotten some bits. |
#5
|
||||
|
||||
![]()
Hi,yes i am running a rear roll bar thick b4 ,on the weight front 60 grams behind the servo 60 grams under the Speedo no weight under lipos and a lot of slip in the clutch,would thicker oil help the problem??yes to espeed hangers high
Cheers for your help chris |
#6
|
||||
|
||||
![]()
Which wheels lifting at what part of the turn?
__________________
Nortech is ACE! |
#7
|
||||
|
||||
![]() Quote:
Driving with lots of oversteer !! I don't run a rear antiroll bar,If if I was you I would Give the car a full strip and rebuild and a new set of tyres Making sure every thing is silky smooth . |
![]() |
Thread Tools | |
Display Modes | |
|
|