Gear Protector??

[Rooster]

Hi Guys..
Is there any aftermarket gear protectors for the Lazer??
Or is it only to "D.I.Y."??
Today, after about five minutes of driving the familiar sound of sand eating my maingear was heard all over the track .. I´m kind of new to the 1:10 EP stage so I´m not sure what´s common. Is that the way it´s supposed to be, tha main gear working as a vacum cleaner???

Put me in the right direction..

Peter

[ulrich]

Originally Posted by Rooster

Hi Guys..
Is there any aftermarket gear protectors for the Lazer??
Or is it only to "D.I.Y."??
Today, after about five minutes of driving the familiar sound of sand eating my maingear was heard all over the track .. I´m kind of new to the 1:10 EP stage so I´m not sure what´s common. Is that the way it´s supposed to be, tha main gear working as a vacum cleaner???

Put me in the right direction..

Peter

I haven´t seem that, but try tape under your chassis to close the holes and if your body shell is cut after the lines is very open in the rearend, maybe you should change your bodyshell and cut closer to the rear shocktower.

Ulrich

[Rooster]

Mange tack Ulrich...
Yes I´ll try a piece of tape to cover the hole, since I think it´s a far too expensive way to make sand out of small gravel


Peter

[bert digler]

i have lazer complete season original spur you dont need to tape it up dude if you had some sh*t go in u have been really unlucky

[nick oliver]

Dude i had this happen to mine at oswestry.. i found just putting some duck tape there helped! but didnt last to long.. found best is to get some lexan cover it, the duck tape it in place

[bert digler]

i run at oswestry no prob so i fink u han a shite draw